Late Four Digit Ford Radio Codes (no SELECT button)?
ie. Ford 3000 Traffic, 4000RDS, 5000RDS, 6000RDS, 6006E, etc
Switch the radio on and the word CODE should appear in the display
Repeatedly press button 1 until the correct first digit of the code is displayed.
Repeatedly press button 2 until the correct second digit of the code is displayed.
Repeatedly press button 3 until the correct third digit of the code is displayed.
Repeatedly press button 4 until the correct fourth digit of the code is displayed.
Once the code has been correctly selected on the radio's display, press button 5 to enter.
If "LOCK 10" is shown on the display, please contact us for guidance. If the display shows "LOCK 13" code entry will not be possible, and the unit will need to be electronically decoded by a car radio servicing specialist.
Early Four Digit Ford Radio Codes (units with SELECT button)?
ie. Ford 2005, 2006, 2015, etc
Switch the radio on and the word CODE should appear in the display.
If CODE does not appear immediately, press the SELECT button momentarily, and CODE should then appear on the display.
Repeatedly press button 1 until the correct first digit of the code is displayed.
Repeatedly press button 2 until the correct second digit of the code is displayed.
Repeatedly press button 3 until the correct third digit of the code is displayed.
Repeatedly press button 4 until the correct fourth digit of the code is displayed.
Once the code has been correctly selected on the radio's display, press the "SELECT" button to enter.
Three Digit Ford Radio Codes?
ie. Ford 2000, 2001, 2005, 2007, etc
Switch the radio on and the word CODE followed by three dashes should appear in the display. These three dashes should be flashing.
Enter the three digit code by repeatedly pressing station presets 1-3 until each digit is correctly displayed, followed by preset 4 to accept the code. The unit should then function normally.
If, after switching the radio on, the three dashes do not flash, then 3 or more incorrect code entries have been attempted.
If a number 10 appears in the display, then ten incorrect codes have been tried and the unit will need to be decoded by a car radio servicing specialist.
GRUNDIG Serial Number Location?
Remove stereo from car.
On the right hand side of the unit, locate the serial number label. This is normally red and white, and includes a barcode.
VW, PHILIPS, GRUNDIG, AUDI
GRUNDIG SC 303 (C)
AUDI GAMMA CC
GRUNDIG SC 303 (C)
How do I find out what the Provider ID number for my phone?
Check the following picture :
How to enter my Unlock Code on Alcatel ?
Model : Method Generic
1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
Model : 531 & 535
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.
Model : All other Alcatel
1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you
How to enter my Unlock Code on BENQ ?
Model : All Benq
1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code we send to you.
How to enter my Unlock Code on LG Electronics ?
Model : LG KU990 Viewty
1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.
Unlock Instruction for LG TU720 CU 720 AND ALL Shine SERIES
1) Power ON your phone with an accepted SIM card
2) Type *#865625#UNLOCK CODE
3) Press OK
4) Device is now unlocked
Model : LG CU400
1 - Insert SIM Card from a unsupported network provider,
2 - Power on the handset,
3 - Phone will display "Invalid SmartChip"
4 - In Idle screen, enter : 159753#*#
5 - Phone will display "Enter NCK, Remaining 5"
6 - Enter the 8 digit SIM Unlock code
7 - Select "OK"
8 - The handset is now successfully unlocked
Model : LG U8150
1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.
Model : LG U400
1. Insert the network SIM in the handset which has given u the LG U400.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.
Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
10. Then press OK
Model : All other model
1 - Switch ON your phone with an Allowed SIM Card,
2 - Then compose :
2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)
3 - Go to "Menu" and then to "Settings",
4 - Then select "Security",
5 - To finish select "Network Provider" and select "Desactivate"
6 - Enter the Unlock Code we send to you.
Model : To Classify
For the next models u must to insert the original SIM:
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#
After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.
For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.
How to enter my Unlock Code on NEC ?
Model : Nec N342i and Nec N343i
1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.
Model : All others NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #7320*CODE#.
Model : old NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #3210*CODE# and press Call Button.
How to enter my Unlock Code on Nokia ?
Model : All Nokia
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
3 - The phone show "SIM Restriction Off" and was unlocked !
* - fields, obligatory for filling
|
